|
Regulatory Compliance
Manufactured from materials that conform to the requirements of 21CFR Part 177 of the U.S. Code of Federal Regulations and USP Class VI Biological Test for Plastics. ISO 9001, ISO 14001 and ISO 13485 certified.
Water Bubble Point Specification
0.1um: 23psi,0.16 MPa (IPA)
0.2um: 45psi,0.32 MPa
Autoclavable and Sanitizable
Filters can be autoclaved at 126° C for 60 minutes or chemically sanitized in situ using common sanitizing agents such as hot water at 90° C, or, up to five steam-in-place cycles at 135°C (275°F) at <0.35 bar (5 psid) for 20 minutes
| Materials of Construction
Membrane: Hydrophilic Polyethersulfone
Membrane Supports: Polypropylene
Cage, Core, End Caps: Polypropylene
Gasket / O-Rings: EPDM, Buna N, Silicone, Viton, TES, and TEV
Dimensions (nominal)
Lengths: 5 in. (13 cm), 10 in. (25 cm), 20 in. (50 cm), 30 in. (76 cm), 40 in. (102 cm)
Diameter: 2.75 in. (7 cm)
Effective Filtration Area
0.65 m2 (7 ft2) per 10" cartridge element
Operating Conditions
Maximum Forward Differential Pressure:
5.0 bar (73 psid) at 20° C
Maximum Reverse Differential Pressure:
3.0 bar (44 psid) at 20° C
Maximum Operating Temperature: 80° C
|
