High Performance Filtration Products

 

Home

Term and Conditions

Distributor page

Filtration

Filter Discs

Capsules

Cartridge Filters

Mini Filters

Bag filters

Purification

Purification Systems

Capsule Purifiers

Cartridge Purifiers

Housings And Tanks

Tanks

Cartridge Housings -Metal

Cartridge Housing-Plastic

Bag Filter Housing -Metal

Y-Strainer and Valves

Custom Solutions

Particle Counters

Airborne Particle Counter

Liquid Particle Counters

Options

Quick Connect Coupling

Contact Us

PureFlo® BEV Filter Cartridges
PureFlo® BEV filter cartridges are highly-retentive hydrophilic PES membrane filters.  The BEV filter has been designed for beverage applications.  The PES membrane, with polyester supports, provided excellent wetability in an all-polypropylene construction.  No adhesives, binders, or surfactants are used in the manufacturing process.  All cartridges are rinsed with high-purity water to reduce extractables.

The hydrophilic PES membrane, with the polyester supports, enhances the PES pore structure to make it spontaneously wet out in your liquid process.  No pre wetting with IPA and flushing with DI water required, thus, eliminating a potential source of contamination and hazardous waste.  All filter cartridges are flushed and 100% integrity tested to ensure filter performance each and every time.  PureFlo® BEV filter cartridges are well-suited for critical applications where superior flow and particle removal efficiency at 0.1, 0.2, 0.45, 0.65, and 1.2 micron is required.   

Materials of Construction
Membrane: Hydrophilic Polyethersulfone
Membrane Supports: Polyester
Cage, Core, End Caps: Nylon
Gasket / O-Rings: EPDM, Buna N, Silicone, Viton, TES, and TEV

Dimensions (nominal)
Lengths: 5 in. (13 cm), 10 in. (25 cm), 20 in. (50 cm), 30 in. (76 cm), 40 in. (102 cm)
Diameter: 2.75 in. (7 cm)

Effective Filtration Area

0.6 m2 (6.5 ft2) per 10" cartridge element

Operating Conditions

Maximum Forward Differential Pressure:
5.0 bar (73 psid) at 20°
C
Maximum Reverse Differential Pressure:
3.0 bar (44 psid) at 20°
C
Maximum Operating Temperature: 80°
C
 
 

 
SPECIFICATIONS
Regulatory Compliance
Manufactured from materials that conform to the requirements of 21CFR Part 177 of the U.S. Code of Federal Regulations and USP Class VI Biological Test for Plastics.  ISO 9001, ISO 14001 and ISO 13485 certified.   


Autoclavable & Sanitizable
Filters can be autoclaved at 126°C for 60 minutes or chemically sanitized in situ using common sanitizing agents such as hot water at 90°C.  Stainless steel insert required for autoclave and steam in place.  
PureFlo PES Beverage Grade Filter Cartridge Ordering Guide
Document
PureFlo PES Beverage Filter Cartridge
 


 
Email website issues to: WebMaster
Copyright © 2010 JALT Technologies LLC.
All rights reserved.

Email us at: info@jalttech.com
                        powered by RatePoint eXTReMe Tracker 

Exceeding Customer Expectations